Warranty: | 12 Months |
---|---|
Certification: | CE, ISO, CB/CCC |
Installation Method: |
Horizontal |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
APPLICATION
- Self priming water pumps for deep suctions up to 25m to be used in case of important water level gaps.
- Suitable to drain water from wells and in domestic fittings by small and medium sized tanks.
- Before installing the pump verify that all pipes (iron, plastic or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot valve or a check valve. Installed the pump, fill completely both pipes and pump body with clean water. To preserve an efficient priming it is necessary a certain pression in the circuit, therefore it is recommended to install a membrane tank at the delivery of the pump.
|
|
OPERATING LIMITS
-Total suction lift up to 9 mt. with foot valve -Max. operating pressure: 8 bar. -Max. ambient temperature: +40ºC -Max. liquid temperature: +90ºC -Max. altitude: +1000 mt. |
MOTOR
-Insulation class: B -Protection: IP44 -Speed of rotation: 2850rpm -Continuous duty: S1 |
DESIGN FEATURES
-Pump body/motor bracket: cast iron
-Impeller: Brass
-Ejection union:PPO -Bearing: C&U -100% copper winding -Built-in thermal protector for single phase motor -Motor shaft: AISI 304 welded shaft -Mechanical seal: Carbon/Ceramic/NBR/SUS304 |
SPECIAL FEATURES ON REQUEST
-Anti-rust treatment for casting
-PPO/SUS304 impeller
-Cast iron diffuser ,brass nozzle -AISI 1045 motor shaft -Carbon/SiC/V mechanical seal -Other voltage and frequnecy -Insulation class: F |